Incoming inspection
Paper, film, glass cloth, aramid paper and resin are checked against specification before they enter production.
Quality system
Batch-to-batch consistency, controlled and traceable
The challenge with insulation materials is not a single sample. We manage the parameters that decide whether the tenth container behaves like the first.
Process control points
What we control, and how
Thickness, adhesive and resin content, breakdown voltage and dimensions are managed through defined process control points, so each batch can be inspected and traced.
| Control point | What we control |
|---|---|
| Thickness / grammage | Checked against specification and batch records. |
| Adhesive / resin | Dot weight, resin content, volatiles and cure state. |
| Electrical | Breakdown voltage, insulation resistance, dielectric strength. |
| Mechanical | Tensile, elongation, flexural, compression and bond strength. |
| Dimensions / appearance | Width, roll size, thickness tolerance, delamination, defects, burrs. |
| Traceability | Raw-material lot, production date, inspection record, shipment lot. |
Inspection stages
Incoming, in-process and final
In-process control
Thickness, adhesive or resin content, cure state and dimensions are monitored at the defined process control points.
Final inspection
Electrical, mechanical, dimensional and appearance checks before packing; batch test data is retained and traceable.
Test equipment
Typical checks performed on insulation materials in our laboratory:
- Thickness and grammage measurement
- Breakdown voltage and dielectric strength testing
- Tensile, elongation and flexural testing
- Adhesive / resin content and volatiles
- Dimensional and appearance inspection
Specific instrument models and calibration records: [INSERT TEST EQUIPMENT LIST AND CALIBRATION INFO HERE].
Documents we issue
- Datasheet — per product, with typical values and test methods
- COA / batch test data — on request for each shipment
- Inspection record — retained against the shipment lot
- Samples — for approval before bulk supply
Bulk supply is subject to the approved specification, sample and test report.
Certification status
ISO 9001, UL, RoHS and REACH certificates and third-party reports:
[INSERT CERTIFICATE NUMBERS, ISSUING BODIES AND EXPIRY DATES HERE]
We publish a certificate on this page only once the scope and validity have been verified.
Request CertificatesNeed a test report before ordering?
Tell us the product and the parameter you need to verify. We will send the relevant datasheet, sample or batch test data.